Flash FL-230 - Cleaning Procedures; Menu Settings Configuration

www.flash-butrym.pl Strona 5
9. Cleaning
The product must be freed regularly from dust, other deposits and contamination as this may reduce the protective
insulation, which may lead to a fatal electric shock!
Before cleaning, always disconnect the product from mains!
This product should be cleaned with a moist cloth only; never use aggressive cleaning agents, solvents or benzine
for cleaning.
Ensure that the product is completely dry before operating it again after cleaning!
To avoid damage caused during transport, wrap the product in its original packaging only and handle it with great care
during transport!
10. Menu settings:
Main menu
1. EXIT
2. DMX Address [001-512]
3. Option
 Exit
 X reverse [Yes/No]
 Y reverse [Yes/No]
 XY exchange [Yes/No]
4. Display
 Exit
 Language [English/中国]
 Lightness [0-32]
 Back Light
o Auto dim
o Auto off
o Constant open
 Display logo [Yes/No]
5. Man control
 Exit
 01: Shutter [000-255]
 02: Dimmer [000-255]
 03: Lamp/reset [000-255]
 04: Pan/tilt prędkość [000-255]
 05: Pan [000-255]
 06: Tilt [000-255]
 07: Pan fine [000-255]
 08: Tilt fine [000-255]
 09: Tarcza kolorów [000-255]
 10: Tarcza Gobo [000-255]
 11: Efekty Gobo [000-255]
 12: Prism/macros [000-255]
 13: Rotacja Pryzmat [000-255]
 14: Zoom [000-255]
 15: Zoom fine [000-255]
 16: Focus [000-255]
 17: Focus fine [000-255]
 18: Rozmycie [000-255]
 19 Exit
ATTENTION：
DANGER OF LIFE！RISKOF FIRE！
RISK OF SHORT CIRCUIT！
ATTENTION：
FRAGILE!
RISK OF SHORT CIRCUIT！