10
It's easy: how to videos at http://support.flashbike.io
How to select the Pedal Assist Level (PAS)
1. First turn your bike to the On state.
2. Press the + button on the left side of your handlebar to
select 0,1, 2, 3, or 4 PAS levels.
3. Press the - button on the left side of your handlebar to
select 4, 3, 2, 1, or 0 PAS levels.
How to use 7 speed shifter
Note: you must pedal in order to use your mechanical
shifter.
1. To climb a hill, use your right thumb to shift from gear
7 to 1.
2. To ride faster, press the + sign with your right thumb
to reach up to the 7th gear.
Throttle on Demand
To use the throttle make sure your bike is in the On state and
PAS is between 1-4. Then twist the throttle back with your
right hand as show in the image below.
How to disengage the motor
To disengage the motor pull back on either the left or right
side of the brake lever. This will cut o the power to the mo-
tor. Letting go the throttle will also disengage the motor.
To Next Page
Loading...
General