2 channels electronic
time switch
weekly cycle
MONOTRON 300 C
MONOTRON 300 C
User instruction
E
Keys
➀
menu : selection of operating mode
auto : mode of running according to the pro-
gram selected.
prog : new for programming mode.
prog : modif to modify an existing
program.
: checking of the program.
: modification of time, date and
selection of the winter / summer time
change mode .
➁
+and - : navigation or setting of values.
C1 : in
auto, mode, selection of
C2 overrides, or waivers.
➂
enter : to validate flashing information
on display.
➃
: to return to the previous step.
You may return into
auto mode at any moment
using
menu.
If no action is taken for 1 min, the switch returns
into
auto mode.
E
Technical specifications
Electrical characteristics
●
Supply voltage: 230 V AC ± 15%
●
Frequency 50/60 Hz
●
Power consumption : max. 0,5 VA à 50 Hz
●
Output: 2 changeover volt free contacts
●
Maximum load:
AC1 µ16A 250 V~
Cos
φ = 0,6 µ10A 250 V~
Incandescent lighting 2300 W
Halogen lighting 230 V 2300 W
Compensated fluorescent tubes //
(max. 45 µF) 400 W
Non compensated fluorescent tubes,
compensated in series 1000 W
Compact fluorescent lamps 500 W
●
Minimum current.
AC1 100 mA 250 V~
●
Galvanic insulation between power supply and
output = 4 kV
●
Degree of pollution : standard
Functional characteristics
●
Programming capacity: 56 pas
●
Minimum time between 2 steps: 1 minute
●
Running accuracy: ± 1,5 sec / 24h
●
Operating reserve: lithium battery provides
5 years of backup.
●
The product is set into standby state
(display switched-off) after 1 minute with
power off.
It switches back into
auto mode as soon as
power is back or when pressing any key.
●
Protection degree: IP 20
Environment
●
Operating temperature: -5 °C to +45 °C
●
Storage temperature: -20 °C to +70 °C
Connection
●
Flexible capacity: 1 to 6 mm
2
●
Rigid capacity: 1,5 to 10 mm
2
E
Connection diagram:
E
Major characteristics
●
Product delivered with current time and date set.
●
Automatic change of winter / summer time .
●
Programming key (23852 version).
- for permanent waivers,
- for program copy or save.
●
Programming for day or group of days.
●
56 program steps On, Off.
●
Permanent overrides On or Off ( permanent light
on).
●
Temporary overrides On or Off ( flashing).
●
Display bar graph of daily profile for both channels.
●
Keyboard locking possible .
●
Programmable with power off.
E
Reset
●
Program reset:
the program may be completely cleared by
simultaneously pressing the 3 following keys:
menu, ok, . The time and the date will
be kept.
●
Total:
pressing simultaneously the
-, +, ok, menu,
keys lets you clear the entire contents of the
product.
Following a total reset it is necessary to reset
the time and day of the device.
9419.063.02/01.03
FLASH s.a.s. - 33, rue Saint Nicolas - BP 152 - 67704 Saverne Cedex France - http://www.flash.fr
Réf. 23842 Réf. 23852
Réf.23852
Réf.23842
G
To Next Page
Need help?
General
