Flavel WFA6100W - Page 24

24 / EN
Washing Machine / User’s Manual
Problem Reason Soluton
Washing performance is poor:
Oily stains appeared on the
laundry. (**)
Regular drum cleaning is not applied. • Clean the drum regularly. For ths, please
see 4.4.2.
Washing performance is poor:
Clothes smell unpleasantly. (**)
Odours and bacteria layers are formed on the
drum as a result of continuous washing at lower
temperatures and/or in short programmes.
• Leave the detergent drawer as well as
the loadng door of the machne ajar after
each washng. Thus, a humd envronment
favorable for bactera cannot occur n the
machne.
Colour of the clothes faded. (**) Excessive laundry was loaded in. • Do not load the machne n excess.
Detergent in use is damp. • Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
A higher temperature is selected. • Select the proper programme and
temperature accordng to the type and
solng degree of the laundry.
It does not rinse well. The amount, brand and storage conditions of the
detergent used are inappropriate.
• Use a detergent approprate for the washng
machne and your laundry. Keep detergents
closed n an envronment free of humdty
and do not expose them to excessve
temperatures.
Detergent is put in the wrong compartment. • If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Pump filter is clogged. • Check the flter.
Drain hose is folded. • Check the dran hose.
Laundry became stiff after
washing. (**)
Insufficient amount of detergent is used. • Usng nsuffcent amount of detergent for
the water hardness can cause the laundry
to become stff n tme. Use approprate
amount of detergent accordng to the water
hardness.
Detergent is put in the wrong compartment. • If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. • Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Laundry does not smell like the
softener. (**)
Detergent is put in the wrong compartment. • If detergent s put n the prewash
compartment although prewash cycle s not
selected, machne can take ths detergent
durng rnsng or softener step. Wash and
clean the dspenser wth hot water. Put the
detergent n the correct compartment.
Detergent might be mixed with the softener. • Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Detergent residue in the
detergent drawer. (**)
Detergent is put in wet drawer. • Dry the detergent drawer before puttng n
detergent.
Detergent has gotten damp. • Keep detergents closed n an envronment
free of humdty and do not expose them to
excessve temperatures.
Water pressure is low. • Check the water pressure.
The detergent in the main wash compartment got
wet while taking in the prewash water. Holes of
the detergent compartment are blocked.
• Check the holes and clean f they are clogged.
There is a problem with the detergent drawer
valves.
• Call the Authorsed Servce Agent.
Detergent might be mixed with the softener. • Do not mx the softener wth detergent.
Wash and clean the dspenser wth hot water.
Regular drum cleaning is not applied. • Clean the drum regularly. For ths, please
see 4.4.2.