Flebi Swan - Packed in Original Box

Unpacking & assembly
Packed in original box
If you have to repack your bike in its
original box to send it to the Flebi
technical service, we recommend that
you follow the steps below:
- Cover the parts with protections
- Remove the seat post
- Remove the handlebar assembly
- Fold the bike (see 13)
- Put it in the box
- Place the cork fixing the front wheel
- Rest the pedal on a protection
- Put the lever of the front folding
inwards
- Insert the rest of the accessories and
seal the box
3tutorial video: https://youtu.be/54w1l7iQtbw