To Next PageTo Next Page
Need help?Do you have a question about the Fleet Power 1000 and is the answer not in the manual?
Describes deep-cycle wet cell and gel cell batteries suitable for the unit.
Explains series and parallel connections for battery banks.
Guidance on selecting battery bank capacity based on Amp-hours and discharge rates.
Details the 3 stages: Bulk, Acceptance, and Float charge.
Describes the manual equalizing charge for wet cell batteries.
Table showing Bulk, Float, and Equalize voltages for different battery types.
Cautions regarding ignition protection, shock hazards, ventilation, and output waveform.
Essential steps for proper DC and AC wiring, polarity, and mounting.
Instructions for connecting the unit's chassis to the AC ground system.
Guidance on AC input/output wiring, neutral bonding, and wire sizing.
Details on DC wiring, cable sizing, and required battery cable fusing.
Lists common issues like no inverter output and their checks.
General| Brand | Fleet Power |
|---|---|
| Model | 1000 |
| Category | Battery Charger |
| Language | English |
