96
Discovery, Discovery LXE, Pace Arrow, and Pace Arrow LXE
CAUTION:
Hook the motorhome to
shore services when using
the washing machine due to
limited fresh water supply
and grey tank capacity.
CAUTION:
Do not use the washer
while traveling as damage
will occur to the washer
and motorhome.
INFORMATION:
The washer has many
features. Refer to the
manufacturer’s manual in
the owner’s information
file for detailed operating
instructions.
Test Cycle
Before using the washer for the
rst time, or after a long period
of non-use, run a test cycle. The
test cycle will conrm the unit
is working correctly, remove RV
antifreeze that may be present,
and verify all hardware, plumbing
and electronic components are
functioning.
Test cycle requirements:
Wipe the exterior and
interior of the unit with
a damp cloth to remove
accumulated dust.
Ensure water lines are
secure and all necessary
valves are open to supply
water.
Hook to city water or turn
on the water pump (must
have sufcient water in
tank and storage space in
holding tanks).
Hookup to shore power, or
turn on the generator.
Conducting a Test Cycle:
1. Add ½ tablespoon
of detergent to the
detergent chamber (#1
in illustration) of the
automatic dispenser.
CAUTION:
Ensure the automatic
dispenser is in place before
starting the washer. Do
not open the automatic
dispenser when the washer
is running.
2. Close the detergent
dispenser.
3. Turn the cycle knob to
#15 (light load).
4. Set the temperature knob
to warm (rinse is always
cold).
5. Set a spin speed between
400-1200.
6. Press On/Off button to
turn on the machine.
Press and hold to turn off.
7. Press Start/Pause to start
cycle. Press again to stop.
8. The door lock light
(key symbol) will turn
off when the cycle is
complete.
Operating Instructions
1. Load the machine and
ensure door is closed and
rmly latched. See OEM
manual for load types
and weight limits.
2. Set the cycle knob
to the appropriate
wash program. See
OEM manual for
recommendations.
3. Adjust temperature with
temperature knob (rinse
is always cold).
4. Adjust spin speed
according to garment
type.
5. To further customize
the wash program,
press one of the wash
option buttons (Soaking,
Extra Rinse, etc.). See
OEM manual for more
information.
6. Open dispenser drawer
and add appropriate
cleansers and softeners.
Close dispenser door.
7. Press Pause/Start button
to start cycle.
8. The door lock light
(key symbol) will turn
off when the cycle is
complete.
Cleaning the Washer
Clean the exterior, interior and
automatic dispenser as needed.
Exterior:
Clean the exterior with
a soft cloth dipped in
lukewarm, soapy water.
Never use polish of any
kind.
Detergent trays are removable for cleaning
031105ca