Need help?Do you have a question about the Flex-a-Lite 410 and is the answer not in the manual?
General| Type | Electric Fan |
|---|---|
| Voltage | 12V |
| Motor Type | Electric |
| Material | Nylon |
| Blade Material | Nylon |
Instructions for mounting fan brackets to radiator support channels or frame.
Wiring red/black fan wires to yellow/purple VSC wires for Model 410.
Wiring black/red fan wires to yellow/purple VSC wires for Model 430.
Connecting VSC power leads to battery terminals with fuse protection.
Connecting VSC to an ignition-switched fuse tap for power.
Wiring the fan to cycle with the A/C compressor signal.
Installing and connecting the radiator temperature sensor to the VSC.
Connecting optional manual switches for fan control.
Procedure to verify fan operation, check LEDs, and adjust temperature settings.
Wiring 420 puller fan motors to a 12v positive and ground source.
Wiring 440 fan motors to a 12v positive and ground source.
To Next Page
