Flex Waves FW-EQ7 - Preset Mode

OPERATION
11
PRESET MODE
In the Preset Mode the effect plays according to the recalled preset, so the knobs positions don‟t match the
currently recalled values.
Preset Mode is useful to recall previously stored sounds, 8 presets are available and you may step between the
8 presets by keeping pressed the Footswitch On/Bypass. Bypass is still available simply pressing once the same
footswitch.
HOW TO RECALL A PRESET
1. Effect in Bypass. Press Mode Switch until you enter in PRESET MODE: will appear on the display
2
2. Single Press of the footswitch to turn ON the Preset 1.  appears on display.
3. Hold ON the footswitch to change the Preset number.  will appear on display.
4. Repeat Step 4 to switch between the 8 available presets.
5. When you recall a preset, single press of the footswitch to return in Bypass (switch OFF the effect).
2
If the effect was On,  will appear on the display. It means that you entered in Preset Mode with Preset 1 loaded