Switches
4 - On/Bypass
This footswitch has three functions.
- Press and release immediately for standard on/off function in
Free Set Mode (Manual).
- Hold and release to switch between the presets in Preset
Mode.
- Hold to store a sound into a Preset number (Preset Mode) or
to confirm the bank selection/bank position (Bank Mode).
5- Mode/Esc
The FLEX-EQ7 has four mode of operation, selectable by
pressing the Mode/Esc switch , the modes are: FREE SET
Mode ( Manual ), PRESET Mode, BANK Mode and LINK
Mode.
The switch has also the function of aborting the current
operation like storing a Preset or a Bank.
Sliders
6- Graphic Equalizer sliders
Control 7 octave band from 100 Hz to 6.4 KHz by 15 dB up or
down.
7-Level
The level slider allows to control of FW-EQ7‟s output
loudness, so the pedal can be used also as a signal booster.
To Next Page
Loading...