The Flex-EQ7 has four mode of operation, selectable by pressing the Mode/ESC switch, the modes are: FREE
SET Mode (Manual), PRESET Mode, BANK Mode and LINK Mode.
FREE SET Mode (Manual)
When the power is turned on, the default pedal settings are Bypass („ – „ symbol on 7 Segments Display) and
FREE SET Mode.
Each “single” press of the On/Bypass footswitch turns the pedal on or off. When the effect is off ( „ –„ symbol on
display), the sound coming in through the IN Jack is True Bypassed to the OUT jack.
When the effect is on and FREE SET Mode („ Fr „on display ) the pedal plays according to the positions of the
controls.
1. Accent a particular tone range by moving the graphic equalizer sliders. The first three bands adjust the
fundamental and the higher four bands adjust the strength of the harmonic accent.
2. Move the level slider to balance between normal and effect sound.
To Next Page
Loading...