Need help?Do you have a question about the Flex L 1506 VR and is the answer not in the manual?
This angle grinder is designed for dry grinding, cutting metal and stone, and polishing specific surfaces.
Provides general warnings and instructions for safe operation, including personal protective equipment and bystander safety.
Instructions on how to attach the Velcro pad to the spindle for sanding applications.
Steps for placing and securing sandpaper onto the Velcro pad for operation.
How to briefly operate the angle grinder by holding the switch rocker.
Procedure for operating the angle grinder continuously by engaging the switch rocker.
Guidelines for rough-grinding, emphasizing not using cutting-off wheels and proper technique.
Specific safety precautions for cut-off grinding, including guard usage and feed adjustment.
Instructions for cleaning the power tool, ventilation slots, and interior with compressed air.
Information on cut-off carbon brushes and when to seek service if sparking is excessive.
To Next Page
General
