Flex LBE 125 18.0-EC - User Manual

LBE 125 18.0-EC/LB 125 18.0-EC/L 125 18.0-EC-LD
17
Contents
Symbols used in this manual . . . . . . . . 17
Symbols on the power tool . . . . . . . . . . 17
For your safety . . . . . . . . . . . . . . . . . . . 17
Noise and vibration . . . . . . . . . . . . . . . . 21
Technical data . . . . . . . . . . . . . . . . . . . . 22
Overview . . . . . . . . . . . . . . . . . . . . . . . . 23
Instructions for use . . . . . . . . . . . . . . . . 24
Maintenance and care . . . . . . . . . . . . . . 27
Disposal information . . . . . . . . . . . . . . . 28
Declaration of Conformity . . . . . . . . 28
Declaration of Conformity . . . . . . . . 28
Exemption from liability . . . . . . . . . . . . . 29
Symbols used in this manual
WARNING!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 28)
For your safety
WARNING!
Before using the angle grinder, please read
and follow:
– these operating instructions,
– the “General safety instructions” on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The angle
grinder may be operated only if it is
– as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
This angle grinder
– for commercial use in industry and trade,
– For dry grinding and cutting metal and
stone; a special protective hood is
required for cutting,
– for grinding surfaces, for derusting and
stripping paint when used with the elastic
sanding pad (only LBE 125 18.0-EC),
– for drilling in stone material with diamond
bits without using water,
– for use with grinding tool, wire brushes
and accessories recommended in these
instructions or by the manufacturer.
Not permissible are e.g. grinder chainsaw
discs, saw blades and (only L 125 18.0-EC LD)
diamond-coated grinding discs.

Summary

For your safety

Safety Warnings for Angle Grinder

Safety Warnings Common for Grinding, Sanding, Wire Brushing or Abrasive Cutting-Off Operations

Essential safety guidelines for various operations like grinding, sanding, and cutting.

Kickback and Related Warnings

Explains kickback phenomena and provides precautions to prevent loss of control and injury.

Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations

Specific safety advice for grinding and abrasive cutting operations, including guard and wheel usage.

Additional Safety Warnings specific for Abrasive Cutting-Off Operations

Further safety precautions for abrasive cutting-off, focusing on avoiding jamming and kickback.

Safety Instructions for handling batteries

Crucial safety guidelines for handling, charging, and disposing of batteries to prevent hazards.

Technical data

Overview

Instructions for use

Attach the guard

Instructions on how to safely attach the protective guard for different operations.

Attaching;changing the tool

Detailed steps for mounting and changing grinding wheels and accessories.

Cut-off grinding

Maintenance and care

Disposal information

Flex LBE 125 18.0-EC Specifications

General

Motor type	Brushless motor
Product color	Black
Adjustable speed	Yes
Idle speed (max)	9000 RPM
Idle speed (min)	3500 RPM
Grinding disc diameter	125 mm
Input power	- W
Power source	Battery
Battery voltage	18 V
Battery capacity	8 Ah

Weight and Dimensions

Depth	120 mm
Width	330 mm
Height	75 mm
Weight	1850 g