Need help?Do you have a question about the Flex RFE 40 18.0-EC and is the answer not in the manual?
General| Voltage | 18 V |
|---|---|
| Battery Type | Li-ion |
| Spindle | M 14 |
| Power | 400 W |
| Type | Angle Grinder |
Defines the specific applications and intended purpose of the RFE 40 18.0-EC gutter bracket groove chaser.
Provides critical safety warnings and guidelines for operating the power tool safely and preventing injuries.
Explains how to check the battery's charge level using the indicator LEDs and what the LED signals mean.
Details the procedure for replacing or turning the reversible blades in the chaser head, including safety precautions.
Describes how to set the chasing depth between 6 mm and 8 mm by adjusting the rest plate.
Guides the user on the correct method for operating the switch rocker to turn the tool on and off.
Explains how to adjust the operating speed using the speed regulation button and the function of speed preselection.
Provides essential advice and warnings for safe and effective operation of the chaser, including handling and blade condition.
Instructions on how to clean the power tool, ventilation slots, housing, motor, and dust filter using compressed air.
Advises against loosening gear head screws during the warranty period to avoid invalidating claims.
States that repairs must only be performed by an authorized customer service center.
Informs users where to find information on other accessories and spare parts, including exploded drawings.
To Next Page