Flexboat Miniflex-S - Features of the Small Boats up to 10 Ft

6 -
Features of the small boats up to 10 ft
Flexboat line of small boa
ts was developed to work as support boats for larger vessels and t
friendly boat.
Depending on its bottom style, the small boats are divided into three groups as follows:
a) Folding boats
b)
Boats that can be disassembled
c) Boats with rigid bottom
6.1 - Miniflex, Miniflex-S and
TD
 Ideal to support larger vessels;
 When folded, it
fits into a small carrying bag;
 Very light;
 Easy to be transported;
 Its hydrodynamics
assures excellent p
 The trans
om plate and the bottom planks are made of fiberglass thus increasing its durability even
when exposed to bad weather.
6.1.1 Assembly,
disassembly
The foldable boats are very light and fit into a carrying bag which was specially developed for
its transportation. Assembling and disassembling the Miniflex is a simple process that can de
performed by anyone.
Se
S
ee detailed inflating instructions
Owner’s Manual –
Small boats up to 10ft
Features of the small boats up to 10 ft
ts was developed to work as support boats for larger vessels and t
Depending on its bottom style, the small boats are divided into three groups as follows:
Boats that can be disassembled
TD
-8 line of foldable boats
fits into a small carrying bag;
assures excellent p
erformance and maneuverability;
om plate and the bottom planks are made of fiberglass thus increasing its durability even
when exposed to bad weather.
 Bottom type:
Flat bottom with
fiberglass planks and Hypalon fabric.
 Materials: Tran
som plate and bottom
planks
consist of marine ply
encapsulated with reinforced fiberglass
with orthophthalic polyester resin,
reinforced with
450 g/m² of fabric and
Coremat. Finishing in isopht
coat with NPG and anti
disassembly
and transportation of boats with fold
The foldable boats are very light and fit into a carrying bag which was specially developed for
its transportation. Assembling and disassembling the Miniflex is a simple process that can de
Se
e a step by step explanation below:
ee detailed inflating instructions
in item 17 of this manual.
Small boats up to 10ft
5
ts was developed to work as support boats for larger vessels and t
o be a family
Depending on its bottom style, the small boats are divided into three groups as follows:
om plate and the bottom planks are made of fiberglass thus increasing its durability even
Flat bottom with
fiberglass planks and Hypalon fabric.
som plate and bottom
consist of marine ply
wood
encapsulated with reinforced fiberglass
with orthophthalic polyester resin,
450 g/m² of fabric and
Coremat. Finishing in isopht
halic gel
coat with NPG and anti
UV.
and transportation of boats with fold
ing bottom
The foldable boats are very light and fit into a carrying bag which was specially developed for
its transportation. Assembling and disassembling the Miniflex is a simple process that can de