Flexboat Miniflex-S - Mini SR, SR 9.5, SR 10 and SR 10 Line of Rigid Bottom Boat

Step 4 – Installing the seat
Fit the seat onto the screw installed on the tube. Tighten the bolts. Repeat on the o
I
nflated keel
6.3-
Mini SR, SR 9.5, SR 10 and SR 10 S line of rigid bottom boats
They all have a rigid fiberglass bottom which makes them suited for a
MINI-SR, SR 9.5 and SR 10
Reinforced fiberglass hull laminated with orthophtalic polyester resin, reinforced with
Coremat finishing in isophth
alic gel coat with NPG and anti
SR 10-S
Reinforced
fiberglass hull laminated with orthophtalic polyester resin, reinforced with
Coremat
, and injected polyurethane foam between the hull and liner
NPG and anti UV.
Owner’s Manual –
Small boats up to 10ft
Fit the seat onto the screw installed on the tube. Tighten the bolts. Repeat on the o
nflated keel
Lifeline
Mini SR, SR 9.5, SR 10 and SR 10 S line of rigid bottom boats
They all have a rigid fiberglass bottom which makes them suited for a
ny kind of use and activity.
Reinforced fiberglass hull laminated with orthophtalic polyester resin, reinforced with
450 g/m² of fabric and
alic gel coat with NPG and anti
-UV.
fiberglass hull laminated with orthophtalic polyester resin, reinforced with
, and injected polyurethane foam between the hull and liner
. Finishing in isopht
Small boats up to 10ft
8
Fit the seat onto the screw installed on the tube. Tighten the bolts. Repeat on the o
ther side.
ny kind of use and activity.
450 g/m² of fabric and
fiberglass hull laminated with orthophtalic polyester resin, reinforced with
450 g/m² of fabric and
. Finishing in isopht
halic gel coat with