FLEXSTEEL Sectional - Page 3

STEP 3
STEP 4
STEP 5
Figure 4
Attach the back flaps to the bottom of the furniture. (See Figure 5)
Figure 5
Attach the Back (A) to the Seat (B). Ensure the latches fit well. Attach the zippers to connect the flap between
the back (A) and the seat (B). (See Figure 3)
Figure 3
Flip up the back flaps. Connect two cables with headrest labels and two cables with lumbar labels for Chaise /
Recliner Right or Left Arm / Armless Recliner then place them behind the flaps. (See Figure 4)
Assembly Instructions 3/5