Type FLP35-120/240GA English
Please note: Override mode is a temporary temperature setting
that is cancelled automatically by the next event in the scheduled
4-event program.
OVERRIDE
MODE
Child Lock
I want to lock the thermostat menus to prevent the
settings from being changed.
To do so, you must activate the child lock:
1 Press the OK button twice to activate the menu.
2 Press the Up or Down buttons until the Settings option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until the Child lock option
flashes. A padlock symbol will appear in the menu area and O
will flash in the upper part of the display.
5 Press the Up or Down buttons until On flashes.
6 Press the OK button.
7 Select Exit to exit the option.
To unlock the child lock again, proceed as follows:
1 Press the OK button to activate the menu.
2 Then press and hold the Up and Down buttons simultaneously
for three seconds.
SETTINGS
CHILDLOCK
Temperature Unit
I want to change the temperature unit (°C/°F) used in the
display.
To do so, you must:
1 Press the OK button twice to activate the menu.
2 Press the Up or Down buttons until the Settings option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until °C/°F flashes in the menu
area. The unit currently selected will flash in the upper part of
the display.
5 Press the Up or Down buttons until the required unit °C/°F
flashes.
6 Press the OK button.
7 Select Exit to exit the option.
Please note: Temperatures are displayed in Celsius with a resolu-
tion of 0.5 degree and in Fahrenheit with a resolution of 1 degree.
SETTINGS C°/F°
Setting Time
I want to change the time.
To do so, you must:
1 Press the OK button twice to activate the menu.
2 Press the Up or Down buttons until the Settings option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until the Time option flashes.
The currently selected 12 or 24 hour clock will flash in the lower
part of the display.
5 Press the Up or Down buttons to select either 12 or 24 hour
clock.
6 Press the OK button. The hour will begin flashing in the lower
part of the display.
7 Press the Up or Down buttons to set the hour.
8 Press the OK button. Now the minutes will flash.
9 Press the Up or Down buttons to set the minutes.
10 Press the OK button.
11 Select Exit to exit the option.
SETTINGS
TIME
Setting Day
I want to change the day of the week.
To do so, you must:
1 Press the OK button twice to activate the menu.
2 Press the Up or Down buttons until the Settings option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until the Day option flashes.
The currently selected day of the week will flash in the lower
part of the display.
5 Press the Up or Down buttons until the required day of the
week flashes.
6 Press the OK button.
7 Select Exit to exit the option.
Factory setting: OFF
Factory setting: Fahrenheit
Factory setting: 12 hour clock
To Next Page
Loading...