What to do if I am unable to download a file from the Flight Data Systems Avionics Display recorder?
If you are unable to download a file, ensure that the aircraft interface cable is correctly inserted and is not damaged or has any debris causing connection issues. Also, ensure that the HHMPI is configured for the recorder. Finally, select a memory device.
What to do if there is no communication between the Flight Data Systems Avionics Display HHMPI and the recorder?
First, ensure that the HHMPI is configured for the recorder. Second, make sure that the aircraft interface cable is correctly inserted. Finally, ensure that no external memory device is inserted during start-up.
How to fix the issue when Flight Data Systems Avionics Display cannot get IP address through wired network?
Ensure that an Ethernet cable is connected, and ensure correct connection to the recorder. Connection is indicated by a yellow network connection icon found in the status bar of the display. If no link is detected an IP address has not been assigned to the HHMPI, this may be because of your network security settings. See your IT department or contact Flight Data Systems for more information if this occurs.
How to fix the issue when Flight Data Systems Avionics Display cannot get IP address through wireless network?
Ensure that the USB wireless network adapter is plugged into the USB port on the top of the HHMPI, and ensure correct connection to the recorder. Connection is indicated by a white antennae icon found in the status bar of the display. Ensure wireless networking is enabled. If no link is detected an IP address has not been assigned to the HHMPI, this may be because of your network security settings. See your IT department or contact Flight Data Systems for more information if this occurs.
What to do if I cannot copy files from Flight Data Systems Avionics Display HHMPI to PC using a USB cable?
If you cannot copy files, try another USB port. Check that the USB is working and that the PC is displaying the HHMPI as a mass storage device.
What to do if I cannot send files from the Flight Data Systems Avionics Display HHMPI to an FTP server via a wired network connection?
Confirm the FTP settings are correct. Ensure that an Ethernet cable is connected, and ensure correct connection to the recorder. Connection is indicated by a yellow network connection icon found in the status bar of the display. If no link is detected an IP address has not been assigned to the HHMPI, this may be because of your network security settings. See your IT department or contact Flight Data Systems for more information if this occurs.
What to do if I cannot send files from the Flight Data Systems Avionics Display HHMPI to an FTP server via a wireless network connection?
Confirm the FTP settings are correct. Ensure that the USB wireless network adapter is plugged into the USB port on the top of the HHMPI, and ensure correct connection to the recorder. Connection is indicated by a white antennae icon found in the status bar of the display. Ensure wireless networking is enabled. If no link is detected an IP address has not been assigned to the HHMPI, this may be because of your network security settings. See your IT department or contact Flight Data Systems for more information if this occurs.
Why can't I see live data in the live data view on my Flight Data Systems Avionics Display, and only see unknown values?
Ensure correct connection to the recorder. Connection is indicated by a blue aircraft icon found in the status bar of the display. If you want to view the live data in engineering units, ensure that the aircraft has an aircraft definition (database) associated with it. Ensure FDR is in correct mode. Restart the recorder if possible, and try again.
What to do if the Flight Data Systems Avionics Display screen is not visible?
Reset the HHMPI.
How to troubleshoot if Flight Data Systems Avionics Display HHMPI does not power up?
If the unit is battery equipped, the battery may require a charge. For HHMPIs without an internal battery, ensure that it is connected to a powered recorder.
Outlines technical specs for HHMPI models, including weight, dimensions, power, and environmental ratings.
Guides on basic operation, connection, powering, and initial setup of the HHMPI device.
Covers settings for clock, display, network, aircraft, security, live data, and profiles.
Describes managing aircraft lists for easier data assignment and file naming.
Provides procedures for downloading recorded data from FDRs and CVRs to storage devices.
Details how to monitor real-time ARINC 717 data from the FDR using various display formats.
Explains how to display live data in engineering units by assigning aircraft definition files.
Guides on network configuration, including DHCP settings for wired connections.
Step-by-step instructions for adding a new FTP server configuration directly from the HHMPI unit.
Process for modifying settings of an already configured FTP server on the HHMPI.
How to verify the configured FTP connection by performing a test from the HHMPI.
Instructions for configuring FTP settings and other device parameters using the HHMPI's web interface.
Guides on connecting the HHMPI to a wireless network for file uploads using a USB adapter.
Details the download options supported for FA2100, FA2200, and FA2300 recorders.
Step-by-step guide for uploading Operational Flight Program (OFP) files to the HHMPI.
General| Brand | Flight Data Systems |
|---|---|
| Model | FDS 400-301 |
| Category | Avionics Display |
| Language | English |
To Next Page
