Document Title Document No. Revision
Date Section
Supplement S3 to the AMM CTLS-LSA –
CTLS-LSA with ROTAX 912iS
AF 0480 0011 00 05-Aug-12 28-00-12
Approval Ref.: Approved on the Basis of Manufacturer Self Declaration
4 Inspect the Fuel Pumps for damage, corrosion and leakages before re-installation.
5 Install Fuel Pumps in reversed order
28-00.3.3 Fuel Hoses and Lines Replacement
28-00.3.3.1 Type of Maintenance
Line
28-00.3.3.2 Minimum Level of Certification
Airframe and Powerplant mechanic (A&P)
28-00.3.3.3 Procedure
For fuel lines being part of the ROTAX
®
engine, refer to the ROTAX
®
Maintenance Manual
valid for your individual engine.
For all other fuel lines, contact aircraft manufacturer for further instructions.
Bolts
Fuel pumps
To Next Page
Loading...
