Document Title Document No. Revision
Date Section
Supplement S3 to the AMM CTLS-LSA –
CTLS-LSA with ROTAX 912iS
AF 0480 0011 00 05-Aug-12 71-00-7
Approval Ref.: Approved on the Basis of Manufacturer Self Declaration
3
Check conditions of dust filter. Clean Air Filter 2 and Lower Cowling Filter Box 1.
Replace Filter if required.
4
Check the drain hole at the bottom of the dust filter box for obstructions or
blockage.
5 Check incoming air line for damage, security of attachments and condition.
6 Install air filter in reverse order.
71-00.3.4 Starter Replacement
71-00.3.4.1 Type of Maintenance
Line
71-00.3.4.2 Minimum Level of Certification
Airframe and Powerplant mechanic (A&P).
Refer to the applicable Rotax engine maintenance manual for further task specific
requirements.
71-00.3.4.3 Procedure
Refer to the maintenance manual provided by the engine manufacturer for the specific
engine.
71-00.3.5 Generator Replacement
71-00.3.5.1 Type of Maintenance
Heavy
71-00.3.5.2 Minimum Level of Certification
Airframe and Powerplant mechanic (A&P).
Refer to the applicable Rotax engine maintenance manual for further task specific
requirements.
71-00.3.5.3 Procedure
Refer to the maintenance manual provided by the engine manufacturer for the specific
engine.
71-00.3.6 Other Engine Maintenance
This maintenance practice covers all maintenance items that affect the core engine
directly, that are not otherwise defined within this AMM and that are appropriately defined
within the applicable Rotax engine maintenance manual.
71-00.3.6.1 Type of Maintenance
Heavy
71-00.3.6.2 Minimum Level of Certification
Airframe and Powerplant mechanic (A&P).
Refer to the applicable Rotax engine maintenance manual for further task specific
requirements.
To Next Page
Loading...
