Need help?Do you have a question about the Flightline B-24 LIBERATOR and is the answer not in the manual?
General| Brand | Flightline |
|---|---|
| Model | B-24 LIBERATOR |
| Category | Toy |
| Language | English |
Itemizes all components included in the PNP package for user verification.
Explains the use of a specific tool for routing servo and ESC wires through the fuselage.
Instructions for installing the horizontal and vertical stabilizers.
Step-by-step guide for mounting the propellers onto the motor shafts.
Instructions for securing the main wings to the aircraft fuselage.
Details for attaching the 'Emerson Turret' nose variant.
Details for attaching the 'Greenhouse' nose variant.
Guidance on attaching external scale details like turrets and antennas.
Instructions for setting pushrod lengths for optimal control surface movement.
Illustrates connections between servos, receiver, and the integrated control board.
Specifies suitable LiPo battery types, voltages, and capacities.
Critical guidance on balancing the aircraft for safe and stable flight.
Procedure to verify and set the correct rotation direction for all servos.
Details on motor KV value, voltage, current, pull, and propeller size.
Technical diagrams and dimensions for motor mounting hardware.
Step-by-step instructions for installing motors, ESCs, and cowls.
Essential pre-flight check to confirm all control surfaces move correctly.
Guidance on setting control sensitivity and exponential curves for flight.
Critical procedure to synchronize motor power output for consistent thrust.
Advice on using flap-to-elevator mixing for stable flight and landing.
Instructions for setting the correct neutral position for the elevator control surface.
To Next Page
