Flightline SPITFIRE MK.IXC User Manual

Important safety precautions and operational guidelines for users, including age restrictions and battery handling.

Step-by-step guide for assembling the aircraft's fuselage, including pushrod installation.

Instructions for attaching the horizontal stabilizer to the fuselage using screws.

Guide for installing pushrods for elevator and rudder control surfaces, connecting to servos.

Steps for installing pushrods for the ailerons, connecting them to the servo arms.

Instructions for assembling and attaching the main wings using a carbon tube and screws.

Securing the main wing to the fuselage and routing servo wires to the battery compartment.

Detailed specifications and diagrams for pushrod lengths and mounting hole configurations.

Attaching scale details like radiators, cannon barrels, rearview mirror, and antenna.

Overview and connection guide for the integrated control board for surfaces and LEDs.

Guide for installing the battery, checking cabin size, and safety precautions before connection.

Instructions on how to adjust the CG by moving the battery or adding weight.

Procedure to test the correct operation of all control surfaces using the radio transmitter.

Recommended dual rate settings for Aileron, Elevator, Rudder, and Flaps for initial flights.

Important pre-flight checks, recommended elevator trim, and flap-to-elevator mix setup.

Explanation of servo operation (positive/reversed) and identification of servo positions and cable lengths.

Detailed specifications for the model's motor, including KV value, voltage, current, and dimensions.

Steps for installing the motor, propeller hub, propeller, and back plate onto the firewall.

Guide for mounting the ESC under the battery tray for effective cooling via ventilation.

Detailed steps for assembling and attaching the main landing gear components, including shock absorbers.

Instructions for installing the tail wheel assembly, securing the axle with a clip.