Flip Camera Features
Flip Video Camera
Quick Start Guide
http://www.theflip.com/
Connecting to a Computer
1. Make sure the Flip is off.
2. On the side of the Flip (left side when
viewed from the back, right side when
viewed from the front), slide the latch down
to release the USB connector arm.
3. Insert the connector into a USB port on your
computer.
Note: It is recommended you use a USB extension cable
if there is not enough space for your camera.
1. Follow the instructions under “Connecting to a
Computer.”
2. To start the program:
Mac: Double click the FLIPVIDEO icon on your desktop,
and double click Start Flipshare.
PC: Click View your Flip Camcorder Videos using the
program on device in the pop-up dialog box, and click
OK.
3. The Flip Video Program will
appear with your recorded videos
previewed in the right screen.
Note: The program runs directly from your Flip camera,
it can only be used when the Flip is connected to your
computer.
Starting the Flip Video Program
Front Back
Slide down to
turn camera on
and off.
Slide down to
release USB
connector arm.
Record and pause.
Press to view
recordings.
Press to delete
and confirm
video deletion.
Video screen.Recording
microphone.
Recording
lens.
For assistance, go to http://www.theflip.com/support_home.shtml
™
To Next Page
Need help?
General
