Brown County Beekeepers
FLUR Cx Infrared Camera instructions
Note: includes case, camera, USB and wall plug
Important CARE INSTRUCTIONS:
NOTE: You will be responsible for damage to the Infrared camera, please read instructions carefully.
Do not point the camera at the sun – this can cause damage to the detector/sensors
Do not allow camera to sit in a hot car – this can damage camera sensors
Be careful when cleaning lenses – always use lens paper or cloth. Lens can be easily damaged.
Be sure to wipe any water / snow off of the camera after use
1. Charging the Camera – plug FLUR power connector into wall outlet, plug USB into FLUR camera
To Next Page
