Need help?Do you have a question about the FLIR C3 and is the answer not in the manual?
General| Temperature Range | -10°C to 150°C (14°F to 302°F) |
|---|---|
| Field of View | 41° x 31° |
| Thermal Sensitivity | <0.10°C |
| Accuracy | ±2 °C or ±2% of reading |
| Resolution | 80 x 60 pixels |
| Image Storage | Internal memory |
| Connectivity | Wi-Fi |
| Display | 3-inch touchscreen |
| Image Modes | Thermal, MSX, Picture-in-Picture |
| Digital Camera | 640 x 480 pixels |
| File Format | JPEG |
| Battery Life | 4 hours |
| Dimensions | 125 x 80 x 24 mm (4.9 x 3.1 x 0.94 in) |
| Operating Temperature | -10°C to +50°C |
Caution against pointing camera at strong energy sources and high temperatures.
Battery removal, insulation, and careful lens cleaning procedures.
Website for customer help and support resources.
Steps to submit a question, registration required for full support.
List of downloadable resources like firmware, software, and documentation.
Step-by-step guide for initial setup and basic operation.
Procedure for charging the camera battery.
Instructions for powering the camera on and off.
General information and procedure for saving images.
General information and procedure for recalling saved images.
Procedure for deleting individual images from the camera.
Procedure for deleting all saved images from the camera.
How to use the spotmeter to measure temperature at a specific point.
Procedure to hide measurement tools from the display.
How to change the color palette for image analysis.
Explanation of different image modes (Thermal MSX, Thermal, Digital).
How to switch between Auto and Lock temperature scale modes.
How to set emissivity for accurate temperature measurements.
How to compensate for reflected radiation.
How to set the object distance for atmospheric compensation.
How to perform NUC for image correction.
How to use the camera lamp as a flashlight or flash.
Steps for setting up Wi-Fi connections (peer-to-peer and WLAN).
Overview of settings menu options (measurement, save, device).
Procedure for updating camera firmware using FLIR Tools.
Procedure for cleaning the camera body and accessories.
Procedure for cleaning the infrared lens.
Cautions regarding careful cleaning of the infrared lens.
To Next Page
