FLIR Raymarine Rotavecta Z195 - Mounting Options; Surface Mounting

4.1Mountingoptions
TheRotavectacanbesurfaceorrailmounted.
1 2
D13104-1
1.Surfacemount
2.Railmount
4.2Surfacemounting
Followthestepsbelowtosurfacemountyouruniton
amasttoporradararch.
D13105-1
Surfacemountingtheunitonahorizontalsurface
willprovideoptimumperformance.Ifthemounting
surfaceisnothorizontal,useapackingwedge(not
supplied)tomakesurethattheunitisvertical.
D13106-1
1.Usingtheretainingringmarkoutthelocationof
thescrewholesonthemountingsurface.
2.Drillthe2screwholesusingasuitablesizeddrill
bit.
3.Passthecablethroughtheretainingringandnut.
4.Fittheretainingringtothebaseoftheunit.
5.Securetheunittotheretainingringusingthenut.
6.Alignthescrewholesinthesealwiththe2drilled
holesinthemountingsurface.
7.Placethesealonthemountingsurfacesothat
thescrewholeslineupwiththedrilledholesin
themountingsurface.
8.Positiontherotavectaontopofthesealsothat
theretainingringholeslineupwiththedrilled
holesinthemountingsurface.
9.Securetheunittothemountingsurfaceusingthe
screwsprovided,ensuringthatthecablefeeds
throughtheretainingring’scablechannel.
D13107-1
20Rotavecta