Programming Menu System
6
1. Center Spot: Press MENU to enable/disable the display cross-hairs. The
cross-hairs identify the spot that is being measured for temperature.
2. Emissivity: Press MENU to open the Emissivity adjustment utility. Use the
arrows to scroll through the presets (0.95, 0.80, and 0.60) and use the
MENU button to select a preset. Choose the Custom Value utility (last se-
lection on the list) to select a specific emissivity value. At the Custom Val-
ue setting, press MENU and then use the arrows to select the emissivity
value; press MENU to confirm.
3. Thermocouple: Press MENU to toggle the Thermocouple mode ON/OFF
(TG267 only).
• DEVICE SETTINGS
#NAS100014; r. AA/59807/59807; en-US
15
To Next Page
Loading...
