Need help?Do you have a question about the FLIR T1020 and is the answer not in the manual?
General| Resolution | 1024 × 768 pixels |
|---|---|
| Detector Type | Uncooled microbolometer |
| Digital Camera | 5 MP |
| Laser Pointer | Yes |
| Wi-Fi | Yes |
| Image Frequency | 30 Hz |
| Detector Pitch | 17 µm |
| Digital Zoom | 1-8x continuous |
| Video Recording | Yes |
| Storage Media | SD card |
| Spectral Range | 7.5 – 14 µm |
| Temperature Range | -40 °C to +2000 °C (-40 °F to +3632 °F) |
| Field of View | 28° x 21° |
| Display | 4.3 in LCD touchscreen, 800 × 480 pixels |
| Focus | Motorized and manual |
| Image Modes | Thermal, visual, MSX |
| Operating Temperature | -15 °C to +50 °C |
| Storage Temperature | -40 °C to +70 °C (-40 °F to +158 °F) |
| Connectivity | USB 2.0, HDMI |
| Image Storage | JPEG |
| Image Formats | JPEG |
| Thermal Sensitivity | <20 mK at 30°C |
Details warranty information, limitations, and legal notices for FLIR Systems products.
Provides essential safety warnings for device operation, batteries, and laser pointers.
Step-by-step instructions for basic camera setup and operation.
Details the HSI box, system overview, and initial setup procedure.
Explains how to navigate menus using the joystick and touch screen.
Procedures for charging the battery and turning the camera on/off.
Guides for adjusting viewfinder sharpness, lens angle, and manual focus.
Covers saving, previewing, opening, editing, and deleting images.
Guidance on adjusting focus, manual/auto image settings, and temperature range.
Covers changing color palettes, setting object parameters, and camera calibration.
Describes adding, removing, and managing measurement tools and user presets.
Covers resizing, moving tools, and changing object parameters.
Explains displaying values, setting up difference calculations, and measurement alarms.
Details color alarm types (Above, Below, Interval) and their setup procedures.
Explains condensation and insulation alarms for building diagnostics.
Explains the screening alarm for temperature detection and its setup procedure.
Describes connecting to a wireless access point or WLAN.
To Next Page
