Name: FLIR T1020
Brand: FLIR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Recording video clips

21.1 General

You can record and save video clips to the memory card.

Note The camera can be configured to save video in *.mpg or *.csq format. Select

(Settings) > Save options & storage > Video compression.

• Mpeg (*.mpg): Mpeg recordings cannot be edited after the file has been saved.

• Radiometric storage (*csq): A *.csq file supports full radiometry but is only supported

by FLIR Systems software. The file does not include any visual image information.

With this setting, only Thermal image mode is supported when recording video. If any

other image mode is active when Video recording mode is selected, the camera will

auto-switch to Thermal image mode.

21.2 Procedure

Follow this procedure:

1. Push the joystick to display the menu system.

2. Use the joystick to go to

(Recording mode).

3. Push the joystick. This displays a submenu.

4. Select

(Video) and push the joystick.

5. Do the following:

• To start a recording, push and release the Save button. A counter at the top of the

screen displays the duration of the recording.

• To stop a recording, push and release the Save button.

6. The recording is automatically saved to the image archive, where you can play or de-

lete it.

#T559954; r. AP/42311/42335; en-US

Other manuals for FLIR T1020

Questions and Answers:

Need help?

Do you have a question about the FLIR T1020 and is the answer not in the manual?

General