Name: FLIR T1020
Brand: FLIR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Working with measurement tools17

2. Push the joystick. This displays a dialog box where you can select the measurement

tools that you want to use in the difference calculation. You can also select a fixed-

temperature reference.

3. Push the joystick. The result of the difference calculation is now displayed on the

screen.

17.8 Setting a measurement alarm

17.8.1 General

You can make the camera trigger an alarm when certain measurement conditions are

met.

17.8.2 Types of alarm

You can choose between the following alarm types:

• Above: Triggers an alarm when the temperature is above the preset alarm

temperature.

• Below: Triggers an alarm when the temperature is below the preset alarm

temperature.

17.8.3 Alarm signals

When an alarm is set, the symbol

is displayed in the result table.

When an alarm is triggered, the value in the result table is displayed in red (above alarm)

or blue (below alarm) and the symbol

(above alarm) or (below alarm) is blinking.

You can also set an audible alarm (there will be a “beep” when the alarm is triggered).

17.8.4 Procedure

There are different procedures for setting up an alarm for a spot, box, circle, or line and

for a difference calculation.

17.8.4.1 Setting up an alarm for a spot

Follow this procedure:

1. To select the spot, touch the tool on the screen. The tool is now displayed with a

frame.

#T559954; r. AP/42311/42335; en-US

Other manuals for FLIR T1020

Questions and Answers:

Need help?

Do you have a question about the FLIR T1020 and is the answer not in the manual?

General