Need help?Do you have a question about the FLIR VP50-2 and is the answer not in the manual?
General| Frequency Range | 50/60 Hz |
|---|---|
| Storage Temperature | -40°C to 70°C |
| IP Rating | IP54 |
| Thermal Sensitivity/NETD | < 50 mK |
| Frame Rate | 9 Hz |
| Focus | Fixed |
| Accuracy | ±2°C or ±2% of reading |
| Ingress Protection | IP54 |
| Operating Temperature | -10°C to 50°C |
| Humidity | 0% to 85% RH |
| Safety Category | CAT IV 600V |
| Spectral Range | 8 to 14 μm |
| Temperature Range | 14°F to 257°F (-10°C to 125°C) |
Details copyright information and usage restrictions for the manual and software.
Information about the ISO 9001 certified quality management system and commitment to development.
Instructions on how to access the latest manuals and product documentation online.
Guidelines for environmentally friendly disposal of electronic products in accordance with regulations.
Explanation of safety symbols used in the manual, including warnings for electrical shock and insulation.
Overview of the product's physical components and their labels as shown in a diagram.
Detailed explanation of the functions of the power button, flashlight button, indicators, and beeper.
Explains the two sensitivity modes (normal/low and high) and their voltage detection capabilities.
Step-by-step guide for turning on, checking status, and initial device use.
Details on activating and deactivating the integrated flashlight.
How the device indicates low batteries and automatic shutdown.
Information on automatic power-off timers for the meter and flashlight.
Procedures for cleaning the device with mild detergent and proper storage guidelines.
Step-by-step instructions for safely replacing the batteries in the device.
Contact information and address for FLIR Systems' corporate headquarters for support inquiries.
To Next Page
