Descriptions
5
Status Indicator
When the meter is functioning normally and not in an alarm condition,
the status indicator glows solid green (normal, low sensitivity, mode)
or solid amber (high sensitivity mode).
If the status indicator is flashing amber, please replace the batteries.
If the status indicator is flashing red, the meter is malfunctioning,
please return the meter for service.
BEEPER
In test mode, the beeper sounds when voltage is detected. The
beeper also sounds when a button is pressed to change a function or
to power ON or OFF.
#NAS100038; r. AD/64642/64642; en-US
7
To Next Page
Loading...