1919
Charging Flitecell
1 Remove Flitecell from its travel bag.
2 Place Flitecell in a cool dry location away from flammable or hot items.
3 Connect Flitecell charger plugs to Flitecell terminals ensuring to
connect the orange (positive) connector to the orange terminal first
and the black (negative) connector to the black terminal.
4 Check that connections have been made correctly. Plug the
charger in the wall socket. A supplied magnet located in the accessories
pack, is required to be placed on Flitecell, as shown by arrow, (5 – 10
seconds) to activate charging. If the magnet has been misplaced, you
can use the base of Flite Controller to initiate charging.
5 The charger will automatically turn o when the charging process
is complete.
FLITECELL IS A POWERFUL BATTERY CONTAINING A SIGNIFICANT AMOUNT
OF ENERGY. CHARGING A DAMAGED FLITECELL CAN RESULT IN A FIRE OR
EXPLOSION. ALWAYS INSPECT THE FLITECELL BEFORE CHARGING. CHARGE
THE FLITECELL UNDER SUPERVISION, IN A SAFE LOCATION, AWAY FROM
DIRECT SUNLIGHT, MOISTURE AND AWAY FROM FLAMMABLE OBJECTS
AND SURFACES.
THE BATTERY MANAGEMENT SYSTEM (BMS) BALANCES AND OPTIMISES
FLITECELL DURING EACH CHARGE CYCLE.
IT IS RECOMMENDED TO LEAVE THE FLITECELL CONNECTED TO A POWERED
OFF CHARGER AFTER A FULL CHARGING CYCLE, WITH THE MAGNET STILL
CONNECTED (THIS KEEPS THE FLITECELL ON ONLY). THIS ENSURES THAT
BOTH THE TERMINALS +/- ARE PROTECTED FROM SHORTING AND THE CELLS
WITHIN THE FLITECELL CONTINUE TO SELF-BALANCE BETWEEN USE.
Red light flashes Capacity 0% – 10%
Red light on Capacity 10% – 20%
Green light on Capacity is 20% – 35%
Green light flashing Capacity 0% – 35% + charging
Two green lights on Capacity 35% – 65%
One on + one flashes Capacity 35% – 65% + charging
Three green lights on Capacity 65% – 100%
Two on + one flashes Capacity 65% – 100% + charging
Flitecell light
Light meaning
MAGNET
PLACED
TO ACTIVATE
CHARGING
To Next Page
Loading...