Flite 2 Series - Flite Controller overview

31
Turn on and connect Flite Controller
1 Turn on Flite Controller by holding down the + button
AND Mode (bottom) button together for 3 seconds.
2 After a 3 second press of both buttons, the Flite logo will appear
with the software version number, and the Controller will move to the
home screen with lock icon.
1
2
IF THE REAR LIGHT HAS A BLUE SOLID LIGHT (NOT BLINKING) YOUR
FLITE CONTROLLER IS CONNECTED. IF THE RECEIVER LIGHT IS
FLASHING YOUR CONTROLLER AND FLITEBOARD NEED TO BE PAIRED.
Flite Controller disconnected
(requires pairing) and motor
locked (requires arming).
Power Level 1 (Gear 1).
Hold + button for 7 seconds
to put into pairing mode.
Flite Controller overview
— (Minus) button
LCD display screen
+ (Plus) button
Magnetic charge connection point
Throttle trigger
Mode button
Pairing and arming point
Wrist strap