Floater DF210 - Operating the Air Cooler; Basic Functions and Modes; Oscillation and Timer Settings

OPERATING INSTRUCTIONS
ON/OFF BUTTON:
Will turn the unit completely on or o. When turned on, the unit remembers
previous settings, except for vertical oscillation.
SPEED BUTTON:
Press the speed button to set air speed and mode. Pressing multiple times,
changes the air speed to LOW or MEDIUM or HIGH and the mode to Natural or
Sleep mode.
NATURAL MODE:
In this mode, the unit operates in a random cycle of a combination of
LOW, MEDIUM and HIGH to simulate a natural breeze.
SLEEP MODE:
In this mode, the unit will start at HIGH speed for 30 minutes, dropping
to MEDIUM speed for 30 minutes, and continue on LOW speed. This will
continue until is turned o or end at the set time, if the timer function
is activated.
TIMER BUTTON:
Can be set to turn o automatically at the 1, 2, 4, 6, and 8 Hour marks.
VERTICAL OSCILLATION:
When this button is pressed, the louvers oscillate up and down. Press the button
again to lock in any position. Press again to resume vertical oscillation. Do not
manually adjust the louvers - damage to the unit will result.
HORIZONTAL OSCILLATION:
When this button is pressed, the louvers oscillate side to side. Press the button
again to lock in any position. Press again to resume horizontal oscillation. Do
not manually adjust the louvers - damage to the unit will result.