EasyManua.ls Logo

Floater DF210 - Troubleshooting and Remote Use; Resolving Float Switch Issues

Floater DF210
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING TIP
If the Cooler/Humidier function automatically shuts o even though there
is enough water in the tank, the oat switch that protects the water pump
is stuck. When the oat switch is stuck, the unit acts as if there is no water
in the tank. In order to dislodge the oat switch, please drain the unit of
water and ensure that it is dry. Grab the handle on the back of the unit and
shake the unit from side to side and up and down vigorously. This will reset
the oat switch and the Cooler/Humidier function will work properly.
*
REMOTE CONTROL:
The unit can also be controlled directly with the remote control. To open the
battery cover on the bottom of the remote control, use a coin and turn to the
open position, and install a 3V CR2032 battery. Replace the battery cover.
There are 6 keys on the remote control, they function the same as the button
controls on the control panel.
When using remote control, it should be aimed at the Remote Control Receiver.

Related product manuals