Floe SECTIONAL DOCK WEDGE

To Next Page

FLOE SECTIONAL DOCK WEDGE

ASSEMBLY INSTRUCTIONS

KIT P/N 510-02150-00 4' GREY ALUMINUM

KIT P/N 510-02155-00 4' ALUMA-GRAIN

TOOLS REQUIRED

- 7/32" ALLEN HEAD SOCKET

- 9/16" SOCKET OR WRENCH

- TORQUE WRENCH

- 13/32" DRILL BIT

- CORDLESS DRILL

- TAPE MEASURE

- PENCIL OR MARKER

SHEET 1 OF 4

Floe International, Inc.

48473 State Hwy. 65

McGregor, MN 55760

INSTRUCTION P/N 610-02150-00

ISSUED: 4/14/2016

Sectional Docks and Leg Kits are sold separately.

Need help?

Do you have a question about the Floe SECTIONAL DOCK WEDGE and is the answer not in the manual?

Summary

Attach a Quick Connect to the dock frame using a 3/8 x 2" button head bolt and aluminum nut, torqued to 20 ft/lbs.

Attach second and third Quick Connects to the dock frame beam using a 3/8 x 2" button head bolt and aluminum nut, torqued to 20 ft/lbs.

Attach Safety Quick Connect to the Wedge frame using a 3/8 x 2" button head bolt and aluminum nut, torqued to 20 ft/lbs.

General