Please note that the device firmware update function is exclusively available in
the Windows app.
The dongle has three modes: high quality, gaming, and broadcast. The active
codec will be displayed in the 'Codec in Use' panel, along with the overall
dongle state in the 'Dongle State' and the low-energy audio state in the 'LE
Audio State' panel accordingly. The table below displays the preferred audio
codec when supported by the remote device under high-quality and gaming
mode. If the preferred codec is not supported by the remote device, SBC is the
default for classic Bluetooth devices, while LC3 is the default for LE audio
devices.
In broadcast mode, LC3 is utilized as mandated by the LE audio standard.
After launching the app, it will retrieve and display the current working mode
along with other settings of the dongle.
To Next Page
Loading...