LJ3204P User Manual
9/26
Edit by Victor Xu
Copyright2011@ Shenzhen Runtianzhi Digital Equipment Co.,Ltd www.floradigital.com.cn
1.6 Regular Inspection and Maintenance
The following regular inspection and maintenance must be performed in terms of characteristics of the
solvent ink:
¾ Clean the carriage unit and platform surface every day.
¾ Make sure that the carriage covers are always replaced.
¾ Perform print head cleaning when leaving the printer for a long time (1 day or more with no power).
¾ Perform ink supply circuit after leaving the printer idle for a long time.
1.7 Consumables
¾ Always use the recommended consumables (printing media, ink, ink filters). Failure to follow this
instruction may cause poor printing quality and breakdown.
¾ Do not use ink past the expiration date as this may cause a print head breakdown and poor printing
quality.
¾ Put a used ink bottle into a plastic bag and dispose of it as an industrial waste. Observe local
regulations for disposal of waste ink bottles.
¾ Avoid spilling ink into your skin or clothes. Wash any ink off immediately with soapy water.
¾ Check the waste ink container everyday so as not to permit waste ink to leak from you printer.
¾ If the waste ink container is being installed or removed, spread a stain preventing sheet so as not to
stain the floor with spilled ink.
¾ Store ink in a dark and cool place, room temperature recommended 20C~25C. Never store the ink in
high temperatures or direct sunlight, doing so may cause the ink to deteriorate.
To Next Page
Loading...
