FLORABEST 93562 User Manual (English)

Questions and Answers:

K
Kristin NealAug 22, 2025
What to do if my FLORABEST 93562 Chainsaw does not start?
- E
  Eric BlanchardAug 22, 2025
  If your FLORABEST Chainsaw doesn't start, several factors could be at play. First, examine the mains voltage: check the plug socket, cable, line, and plug, and if needed, have an electrical specialist make repairs. Also, inspect the house protection fuse. Other potential causes include a defective On/Off switch, worn carbon brushes, or a defective motor, all of which require repair by customer service.
A
Amanda ColemanAug 23, 2025
Why is the cutting performance of my FLORABEST 93562 inferior?
- M
  Mark GonzalesAug 23, 2025
  Subpar cutting performance in your FLORABEST Chainsaw could stem from a few issues. Ensure the saw chain is mounted correctly. If the chain is blunt, sharpen the cutting teeth or replace the chain. Also, check the chain tension, as insufficient tension can impact cutting efficiency.
C
Chad WeaverAug 25, 2025
What to do if the chain of my FLORABEST Chainsaw becomes hot and there is smoke during sawing?
- P
  Phillip DuarteAug 25, 2025
  If your FLORABEST Chainsaw's chain becomes hot, produces smoke, and the rail discolors, it's likely due to insufficient chain oil. Check the oil level and refill if needed. Also, inspect the oil automatic system, and if necessary, clean the oil outflow duct or have it repaired by customer service.
M
mark06Aug 27, 2025
Why does my FLORABEST 93562 run with difficulty and the chain comes off?
- K
  Krista JonesAug 27, 2025
  If your FLORABEST Chainsaw runs with difficulty and the chain frequently comes off, the chain tension is likely insufficient. Check the chain tension and adjust it accordingly.
J
Jeffrey SmithAug 27, 2025
How to fix a FLORABEST Chainsaw when the chain does not rotate?
- B
  Bruce MacdonaldAug 28, 2025
  If the chain on your FLORABEST Chainsaw isn't rotating, the chain brake might be blocking it. Check the chain brake and release it if necessary.
W
William BrownAug 29, 2025
Why is my FLORABEST 93562 chain getting hot and smoking?
- J
  James HuberAug 29, 2025
  If the FLORABEST Chainsaw chain gets hot, produces smoke while sawing, or the rail discolors, it's likely due to insufficient chain oil. Examine the oil level and replenish it as needed. Also, inspect the automatic oil system, and if necessary, clean the oil outflow duct or seek repair from customer service.
K
Kaitlyn HaynesAug 30, 2025
How to fix FLORABEST 93562 that does not start?
- B
  Billy LeachAug 30, 2025
  If your FLORABEST Chainsaw isn't starting, several factors could be at play. First, check the plug socket, cable, line, and plug for any defects, and have them repaired by an electrical specialist if needed. Also, verify the house protection fuse. A defective On/Off switch, worn carbon brushes, or a defective motor could also be the cause, and in these cases, you should seek repair by customer service.
C
cruzteresaSep 1, 2025
What to do if FLORABEST Chainsaw runs with difficulty and chain comes off?
- D
  Derrick SmithSep 1, 2025
  If your FLORABEST Chainsaw runs with difficulty and the chain comes off, it might be due to insufficient chain tension. Make sure to check the chain tension and adjust it as needed.
U
uluceroSep 2, 2025
What to do if FLORABEST 93562 Chainsaw chain does not rotate?
- E
  ewilliamsSep 2, 2025
  If the chain of your FLORABEST Chainsaw isn't rotating, the chain brake might be blocking it. Check the chain brake and release it if necessary.
D
Daniel CombsSep 3, 2025
Why is my FLORABEST 93562 chain becoming hot and smoking?
- O
  olsonshaunSep 4, 2025
  If the chain of your FLORABEST Chainsaw is getting hot, smoking, and the rail is discolored, it's likely due to insufficient chain oil. Check the oil level and refill it with chain oil if needed. Inspect the oil automatic system and clean the oil outflow duct, or have it repaired by customer service.