FLORABEST FKS 2200 D2 User Manual (English)

Questions and Answers:

L
larry95Aug 22, 2025
What to do if my FLORABEST FKS 2200 D2 does not start?
- J
  Jason HolmesAug 22, 2025
  If your FLORABEST Chainsaw doesn't start, several factors could be at play. First, examine the mains voltage: check the plug socket, cable, line, and plug, and if needed, have an electrical specialist make repairs. Also, inspect the house protection fuse. Other potential causes include a defective On/Off switch, worn carbon brushes, or a defective motor, all of which require repair by customer service.
L
luke84Aug 23, 2025
Why is the cutting performance of my FLORABEST FKS 2200 D2 Chainsaw inferior?
- W
  William WilsonAug 23, 2025
  Subpar cutting performance in your FLORABEST Chainsaw could stem from a few issues. Ensure the saw chain is mounted correctly. If the chain is blunt, sharpen the cutting teeth or replace the chain. Also, check the chain tension, as insufficient tension can impact cutting efficiency.
J
Jennifer JacobsAug 25, 2025
What to do if the chain of my FLORABEST FKS 2200 D2 Chainsaw becomes hot and there is smoke during sawing?
- W
  westdanielAug 25, 2025
  If your FLORABEST Chainsaw's chain becomes hot, produces smoke, and the rail discolors, it's likely due to insufficient chain oil. Check the oil level and refill if needed. Also, inspect the oil automatic system, and if necessary, clean the oil outflow duct or have it repaired by customer service.
K
Kristin BrownAug 27, 2025
Why does my FLORABEST FKS 2200 D2 run with difficulty and the chain comes off?
- C
  Casey HorneAug 27, 2025
  If your FLORABEST Chainsaw runs with difficulty and the chain frequently comes off, the chain tension is likely insufficient. Check the chain tension and adjust it accordingly.
M
Michael SchmidtAug 27, 2025
How to fix a FLORABEST Chainsaw when the chain does not rotate?
- M
  Mark YangAug 27, 2025
  If the chain on your FLORABEST Chainsaw isn't rotating, the chain brake might be blocking it. Check the chain brake and release it if necessary.
L
Laura PittmanAug 29, 2025
Why is my FLORABEST FKS 2200 D2 Chainsaw chain getting hot and smoking?
- K
  keithgreenAug 29, 2025
  If the FLORABEST Chainsaw chain gets hot, produces smoke while sawing, or the rail discolors, it's likely due to insufficient chain oil. Examine the oil level and replenish it as needed. Also, inspect the automatic oil system, and if necessary, clean the oil outflow duct or seek repair from customer service.
S
scottmillerAug 30, 2025
How to fix FLORABEST Chainsaw that does not start?
- A
  Amy MitchellAug 30, 2025
  If your FLORABEST Chainsaw isn't starting, several factors could be at play. First, check the plug socket, cable, line, and plug for any defects, and have them repaired by an electrical specialist if needed. Also, verify the house protection fuse. A defective On/Off switch, worn carbon brushes, or a defective motor could also be the cause, and in these cases, you should seek repair by customer service.
J
Jorge LambertSep 1, 2025
What to do if FLORABEST FKS 2200 D2 Chainsaw runs with difficulty and chain comes off?
- N
  Nancy WhiteSep 1, 2025
  If your FLORABEST Chainsaw runs with difficulty and the chain comes off, it might be due to insufficient chain tension. Make sure to check the chain tension and adjust it as needed.
M
Madison MillerSep 2, 2025
What to do if FLORABEST FKS 2200 D2 chain does not rotate?
- J
  James LeonardSep 2, 2025
  If the chain of your FLORABEST Chainsaw isn't rotating, the chain brake might be blocking it. Check the chain brake and release it if necessary.
K
Katherine DodsonSep 3, 2025
Why is my FLORABEST FKS 2200 D2 Chainsaw chain becoming hot and smoking?
- M
  Michael KennedySep 3, 2025
  If the chain of your FLORABEST Chainsaw is getting hot, smoking, and the rail is discolored, it's likely due to insufficient chain oil. Check the oil level and refill it with chain oil if needed. Inspect the oil automatic system and clean the oil outflow duct, or have it repaired by customer service.

FLORABEST FKS 2200 D2 Specifications

General

Brand	FLORABEST
Model	FKS 2200 D2
Category	Chainsaw
Language	English

Summary

Introduction

Intended Purpose

Defines the electric chainsaw's intended use for sawing wood only, for DIY users, and by adults.

General Description Overview

Provides an overview of the electric chainsaw, its parts, and functions.

Technical Data

Safety Functions

Describes the safety features of the chainsaw, like hand guards and chain brakes, to protect the user.

Safety Notes and Symbols

Symbols in Instructions

Explains the meaning of various symbols used in the manual for hazard and precaution information.

Symbols on the Saw

Illustrates and explains symbols found directly on the chainsaw for safe operation.

General Safety Instructions for Power Tools

Work Area Safety

Guidelines for a safe work environment, including cleanliness and keeping bystanders away.

Electrical Safety

Safety measures for electrical connections and power supply to prevent hazards.

Personal Safety

Personal Safety Precautions

Advises users to stay alert, use common sense, wear PPE, and prevent unintentional starting.

Power Tool Use and Care

General Use Guidelines

Covers safe operation, avoiding force, checking switches, and proper tool maintenance.

Chain Saw Safety Warnings

Specific safety advice for chainsaw operation, including grip, body positioning, and avoiding moving parts.

Chain Saw Safety Warnings

Handling and Operation

Details safe handling, proper footing, avoiding slippery surfaces, and cutting tensioned branches.

Causes and Prevention of Kickback

Explains kickback, its causes, and how to avoid it through correct technique and precautions.

Causes and Operator Prevention of Kickback

Kickback Definition and Avoidance

Defines kickback, its causes, and emphasizes firm grip, proper body positioning, and manufacturer-specified parts.

Further Safety Directions

Provides additional safety advice regarding damaged cords, extension cables, surge protectors, and maintenance.

Tensioning the Saw Chain

Chain Tensioning Procedure

Explains how to correctly tension the saw chain, including checking tension regularly and adjusting the chain.

Chain Lubrication

Stresses the importance of constant chain oiling for performance and longevity, and how to identify low oil.

Operating the Chainsaw

Switching On

Step-by-step guide on how to safely start the electric chainsaw, including checks and brake release.

Checking the Chain Brake

Chain Brake Functionality Check

Instructions for verifying the proper function of the chain brake before and during operation.

Checking Chain Lubrication

How to check if the chain is receiving adequate lubrication during operation.

Fitting the Saw Chain

Saw Chain Fitting Procedure

Step-by-step guide on how to install the saw chain onto the guide bar and sprocket.

Sawing Techniques

General Sawing Principles

Basic principles for effective sawing, including control, avoiding ground contact, and preventing jams.

Sawing Techniques

Bucking

Instructions for cutting a felled tree trunk into smaller sections, with specific methods for log support.

Limbing

Guidance on safely removing branches and boughs from a felled tree, including height limits.

Sawing Techniques

Felling Trees

Procedures for felling trees safely, including safety distances, felling direction, and precautions for wind.

Cutting Notch and Back Cut

Detailed steps for creating a cutting notch and a back cut for felling trees, including dimensions and wedges.

Maintenance and Cleaning

Maintenance Interval Table

A table outlining recommended maintenance actions for different machine parts and their intervals.

Cleaning Procedures

Instructions for cleaning the chainsaw components after use to ensure longevity and avoid accidents.

Maintenance Intervals

Regular Maintenance

Emphasizes the importance of regular maintenance for extending saw life and ensuring optimal performance.

Trouble Shooting

Common Problems and Solutions

A table listing common problems, their possible causes, and recommended fault corrections.

Oil the Saw Chain

Chain Oiling Procedure

Detailed steps on how to properly oil the saw chain, including frequency and cleaning the guide bar.

Sharpening the Saw Chain

Chain Sharpening Guidelines

Explains how to sharpen the saw chain, including safety, necessary tools, and measurement data.

Sharpening the Saw Chain

Sharpening Technique

Provides specific instructions on how to sharpen the cutting teeth correctly from inside to outside.

Adjusting the Chain Tension

Chain Tension Adjustment

Describes how to adjust the chain tension, ensuring it is neither too loose nor too taut, and checking the gap.

Maintaining the Chain Bar

Chain Bar Maintenance

Instructions for turning and cleaning the chain bar to ensure uniform wear and proper oiling.

Waste Disposal and Environmental Protection

Proper Disposal Methods

Guidelines for environmentally sound disposal of used oil and the chainsaw unit.

Replacement Parts / Accessories

Obtaining Spare Parts

Information on how to order spare parts and accessories, including website and order numbers.

Guarantee

Guarantee Terms and Conditions

Details the 3-year guarantee period, cover, exclusions, and conditions for claims.

Processing Guarantee Claims

Steps to follow for processing a guarantee claim, including required documentation and contact information.

Service-Center

Contact Information

Provides contact details for service centers in Great Britain and Ireland, including phone and email.

Importer

Importer Address

Lists the address of the importer for reference, noting it's not a service address.

Translation of the original EC declaration of conformity

EC Declaration Details

Confirms the chainsaw's conformity with EU directives and harmonised standards, including sound power levels.

Exploded Drawing

Parts Identification

A diagram showing all chainsaw components with numerical labels for identification.

Related product manuals

FLORABEST FKS 2200 B1

30 pages

FLORABEST FKS 2200 F3

92 pages

FLORABEST FKS 2200 G4

FLORABEST FKS 2200 D2 User Manual

Table of Contents

Questions and Answers:

FLORABEST FKS 2200 D2 Specifications

Summary

Introduction

Intended Purpose

General Description Overview

Technical Data

Safety Functions

Safety Notes and Symbols

Symbols in Instructions

Symbols on the Saw

General Safety Instructions for Power Tools

Work Area Safety

Electrical Safety

Personal Safety

Personal Safety Precautions

Power Tool Use and Care

General Use Guidelines

Chain Saw Safety Warnings

Chain Saw Safety Warnings

Handling and Operation

Causes and Prevention of Kickback

Causes and Operator Prevention of Kickback

Kickback Definition and Avoidance

Further Safety Directions

Tensioning the Saw Chain

Chain Tensioning Procedure

Chain Lubrication

Operating the Chainsaw

Switching On

Checking the Chain Brake

Chain Brake Functionality Check

Checking Chain Lubrication

Fitting the Saw Chain

Saw Chain Fitting Procedure

Sawing Techniques

General Sawing Principles

Sawing Techniques

Bucking

Limbing

Sawing Techniques

Felling Trees

Cutting Notch and Back Cut

Maintenance and Cleaning

Maintenance Interval Table

Cleaning Procedures

Maintenance Intervals

Regular Maintenance

Trouble Shooting

Common Problems and Solutions

Oil the Saw Chain

Chain Oiling Procedure

Sharpening the Saw Chain

Chain Sharpening Guidelines

Sharpening the Saw Chain

Sharpening Technique

Adjusting the Chain Tension

Chain Tension Adjustment

Maintaining the Chain Bar

Chain Bar Maintenance

Waste Disposal and Environmental Protection

Proper Disposal Methods

Replacement Parts / Accessories

Obtaining Spare Parts

Guarantee

Guarantee Terms and Conditions

Processing Guarantee Claims

Service-Center

Contact Information

Importer

Importer Address

Translation of the original EC declaration of conformity

EC Declaration Details

Exploded Drawing

Parts Identification

Related product manuals