EasyManua.ls Logo

FLORABEST FHL 900 D4 - User Manual

FLORABEST FHL 900 D4
44 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
LANGSTIEL-HECKENSCHERE FHL 900 D4
LANGSTIEL-HECKENSCHERE
Originalbetriebsanleitung
LONG-REACH HEDGE TRIMMER
Translation of the original instructions
IAN 275656
275656_flo_Langstiel-Heckenschere FHL 900 D4_cover_DE_AT.indd 2 24.02.16 10:42

Table of Contents

Questions and Answers

  • J
    Julia CortezAug 12, 2025
    Why my FLORABEST FHL 900 D4 Trimmer does not start?
    • T
      Tiffany HarrisAug 12, 2025
      If your FLORABEST Trimmer doesn't start, it could be due to several reasons. First, check the plug socket, cable, line, and plug to ensure they are working. If there's an issue, have it repaired by an electrical specialist. Another potential cause is a defective On/Off switch, which should be inspected and repaired by a Service Centre. Also, worn carbon brushes or a defective motor might be the reason.
  • S
    sbensonAug 21, 2025
    What to do if blades become hot on FLORABEST Trimmer?
    • A
      Alex OrtizAug 21, 2025
      If the blades of your FLORABEST Trimmer are getting hot, it could be due to blunt or notched blades. You should have the blades sharpened or replaced by a Service Centre. Another cause might be excessive friction from a lack of lubrication. Try oiling the blades to resolve this.
  • A
    Antonio MurphyAug 30, 2025
    What to do if FLORABEST FHL 900 D4 Trimmer runs with interruptions?
    • S
      Scott JohnsonAug 31, 2025
      If your FLORABEST Trimmer runs with interruptions, the power cable might be damaged. Check the cable and have it replaced by the Service Centre if necessary. It could also be due to an internal loose electrical connection, which requires repair by a Service Centre. Another potential cause is a defective On/Off switch.

FLORABEST FHL 900 D4 Specifications

General IconGeneral
Power900 W
Cutting width30 cm
Telescopic handleYes
Edging functionYes
Cable length10 m
Noise level96 dB

Related product manuals