I
Ivan JonesAug 13, 2025
What to do if FLORABEST FGS 3.6 B2 Trimmer blade is damaged?
- KKathryn VaughnAug 14, 2025
If the blade of your FLORABEST Trimmer is damaged, this could be why you're experiencing poor cutting results. Replace the blade.
To Next PageTo Next PageWhat to do if FLORABEST FGS 3.6 B2 Trimmer blade is damaged?
If the blade of your FLORABEST Trimmer is damaged, this could be why you're experiencing poor cutting results. Replace the blade.
What to do if FLORABEST FGS 3.6 B2 Trimmer on/off switch is defective?
If your FLORABEST Trimmer doesn't start and you suspect the on/off switch is defective, it needs to be repaired by a service center.
What to do if FLORABEST Trimmer has bad cutting results and the blade is damaged?
If you notice bad cutting results with your FLORABEST Trimmer, it could be because the blade is damaged. In this case, replace the blade.
Why my FLORABEST FGS 3.6 B2 doesn't start?
Your FLORABEST Trimmer might not be starting due to several reasons: the equipment is not charged, so you should charge it; the switch lock has not been operated properly, so switch it on; the safety key is not inserted, so insert the safety key. If none of these solutions work, the on/off switch may be defective, requiring repair by a service center.
What to do if FLORABEST FGS 3.6 B2 Trimmer has bad cutting results?
If your FLORABEST Trimmer is producing bad cutting results, consider these potential issues: the blade might be dirty, so clean it; there may be too much friction due to lack of lubrication, so lubricate the blade; the blade could be blunt or have nicks, so sharpen or replace it; or the blade is damaged, so replace it.
What to do if FLORABEST FGS 3.6 B2 doesn't start because of the safety key?
If your FLORABEST Trimmer doesn't start, it might be because the safety key is not inserted. Insert the safety key to resolve this issue.
What to do if my FLORABEST Trimmer doesn't start?
If your FLORABEST Trimmer doesn't start, it could be due to several reasons. First, ensure the safety key is inserted correctly. If that's not the issue, the switch lock might not be properly operated; make sure to switch it on correctly. Another potential cause is that the equipment is not charged; in this case, charge the equipment.
Why is my FLORABEST Trimmer not cutting well?
If you're experiencing bad cutting results with your FLORABEST Trimmer, it could be due to a few reasons: * The blade might be dirty. Clean the blade. * There may be too much friction due to lack of lubrication. Lubricate the blade.
General| Power Source | Battery |
|---|---|
| Battery Voltage | 3.6 V |
| Battery Type | Li-Ion |
| Cutting Width | 8 cm |
| Cutting Width (grass shears) | 8 cm |
| Cordless | Yes |
| Charging Time | 3 hours |
Specifications and performance details of the cordless trimmer.
Explanation of safety, warning, and information symbols used.
Guidelines for safe operation covering work area, electrical safety, and personal protection.
Advice on staying alert, using protective equipment, and preventing accidental starts.
Specific safety measures when using the unit as a hedge trimmer.
Safety advice specific to tools powered by batteries.
Solutions for common problems encountered with the device.
