FLORABEST FHL 900 E5 - Trouble Shooting Common Issues

17
CY
NI
IEGB
Spare Parts/Accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone
(see “Service-Center” page 19). Please have the order number mentioned below ready.
Pos. exploded Description Order No.
drawing
74+75 Handle with screws for adjusting the blade beam 91096590
178-185 Round handle 91102876
176+177+66 Leg protection 91096595
151-153 Carbon brush 91102871
Trouble Shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage not on
Check plug socket, cable, line
and plug, where appropriate,
have repaired through electrical
specialist
On/Off switch (
A
17)
defective
Repair by Service Centre
Worn carbon brushes
Defective motor
Device runs with inter-
ruptions
Power cable is damaged
Check the cable and have it
changed by the Service Centre if
necessary
Internal loose electrical
connection
Repair by Service Centre
On/Off switch (
A
17)
defective
Blades become hot
Blades (
A
1) are blunt
Have the blades (
A
1) sharpened
or replaced (Service Centre)
Blades (
A
1) are notched
Have the blades (
A
1) checked
or replaced (Service Centre)
Too much friction due to lack
of lubrication
Oil the blades (
A
1)