Flory 860 - Page 13

REF.
NO.
PART NO.
DESCRIPTION QTY.
22 PBC2108 BEARING-counter shaft 2
23 PB55VX750* BELT-suction fan (almonds) (s/n ~1881) 1
PB55VX730* BELT-suction fan (other crops) (s/n ~1881) 1
PB55VX710 BELT-suction fan (almonds) (s/n 1882~) 1
B5VX780 BELT-suction fan (other crops) (s/n 1882~) 5
* Was single belts on s/n ~1238 and is replaced by banded belts.
24 F1048 REDI BOLT-bearing take up 1
25 L14035 SPACER-fan idler 1
26 L10236 SHIM, bearing 2
Recommended Use:
UHMW Blades - All crops
NOTE: It is very important to install the same type of blades on the fan that
were originally removed from the fan in order to maintain the balance of the
fan assembly. If another type of blade is used, (either lighter or heavier) the fan
assembly may need to be re-balanced to avoid vibration.
H25PB009
FLORY INDUSTRIES, INC.
MODEL 850-860 HARVESTER
13
Back To The Table Of Contents