Flory 860 User Manual

PARTS CATALOG
FLORY
TRACTOR POWERED
HARVESTER
MODEL
850-860
As much as possible, parts are arranged in groups of related parts. Parts are
illustrated and identified by reference numbers that correspond to the parts list.
UAR in “Quantity” column indicates that this part is “Used As Required.” NSS in
“Part No.” column indicates that this part is “Not Sold Separately.” Serial Number
breaks are noted by “~”. (I.E. “s/n 101~” indicates “serial number 101 and after.”)
TERMS “RIGHT-HAND” AND “LEFT-HAND”
“Right-hand” and “Left-hand” sides of this machine are determined by
standing at the rear of the unit and facing the direction of forward travel.
ORDERS
Orders should plainly specify correct part number, full description, quantity
requested machine model and serial number.
PHONE (209) 545-1167 FAX (209) 545-2750
FLORY INDUSTRIES, INC. 4737 TOOMES RD PO BOX 908 SALIDA CA 95368
Revised 6/29/16

Flory 860 Specifications

General

Brand	Flory
Model	860
Category	Farm Equipment
Language	English

Summary

PARTS SECTIONS

Front Hitch and PTO Driveshaft

Components of the front hitch and PTO driveshaft assembly.

Suction Fan and Inlet Tube

Parts for the suction fan and its inlet tube.

Tires, Wheels and Hubs

Details on tires, wheels, and hubs for the harvester.

Gearbox Breakdown

Detailed parts list for the gearbox assembly.

Optional Kits

Components for various optional attachments like mud brush, auger drive, chains, hitches, and power packs.

SCHEMATICS

Hydraulic Schematics

Diagrams illustrating hydraulic system configurations and serial number variations.

Electrical Schematics

Diagrams illustrating electrical system configurations and serial number variations.

SAFETY AND OPERATION

Harvest and Safety Stewardship

Guidelines for safe and courteous harvesting practices.

Environmental Stewardship

Recommendations for dust control and environmental care.

Personal Safety

General safety guidelines, warnings, and symbol explanations.

Tractor Operation

Tractor selection, connection, pre-start inspection, and hitch operation.

ADJUSTMENTS AND MAINTENANCE

Suction Fan Adjustments

Adjusting suction fan speed, air control, and belt tension.

Chain Adjustments

Procedures for adjusting primary and elevator dirt chains.

Hydraulic System and Gearbox Maintenance

Maintaining gearbox oil, hydraulic system, and bearings.

Specifications and Fluids

Technical specifications and recommended fluids for the harvester.