Flory 860 - Page 15

REF.
NO. PART NO.
DESCRIPTION QTY.
1 L68155 TUBE-air inlet 1
2 L27060 DOOR-air inlet tube 1
3 5/16TN-C THUMB NUT-door (5/16”) 3
4 L60325 ANCHOR-air inlet tube (s/n ~1986) 2
5 L22050 SHIELD-suction fan drive (upper)(s/n ~1881) 1
L22056 SHIELD-suction fan drive (upper)(s/n 1882~) 1
6 L27020 HINGE-suction fan drive shield 1
7 L22060 SHIELD-suction fan drive (lower) 1
8 P6373B POLY BOLT-shield stop (short) 1
9 P6372B POLY BOLT-shield stop (medium) 2
10 28A382 LATCH-rubber hook 1
11 68D842 HOOK-rubber 1
12 277A80 ANCHOR-rubber hook 1
13A L63840R DEFLECTOR-suction fan (other crops)(s/n ~1433) 1
13B L63855 DEFLECTOR-suction fan 1
(pecan s/n 2185~) (wal./haz. - option)
13C L63845 DEFLECTOR-suction fan 1
(pecan s/n 1434-2169) (wal./haz. s/n 1434~)
14A L34020 LINER-side (L63840R) 1
14B L63755 LINER-side (L63855) 1
14C L34025 LINER-side (L63845) 1
15 L64890 CLAMPSTRIP-wear plate 1
16 701 LATCH-deflector (other crops) 2
17 L63860 DEFLECTOR-suction fan (almonds) 1
18 L65900 VANE-suction fan deflector (steel) 3
L35905 VANE-suction fan deflector (poly-urethane) 3
19 L68140R HOUSING-suction fan (s/n ~1291) 1
L68145 HOUSING-suction fan (s/n 1292~) 1
20 L63700 LINER-suction fan housing (upper front) 1
21 L63710 LINER-suction fan housing (lower front) 1
22 L35720 LINER-end cap 1
23 L35740 LINER-lower suction fan 1
24 L35750 LINER-suction fan door 1
25 L35760 LINER-upper suction fan 1
26 701 LATCH-suction fan door 2
27 L27050 DOOR-suction fan 1
28 L67010 MOUNT-suction fan (right) 1
29 L67030 MOUNT-suction fan (left) 1
30 L10905 REDI BOLT-vane 3
31 L34210
LINER-suction fan deflector (upper)(almonds)(s/n 1247~)
1
32 L34220
LINER-suction fan deflector
(lower)(almonds)(s/n 1247~)
1
H25PB002
FLORY INDUSTRIES, INC.
MODEL 850-860 HARVESTER
15
Back To The Table Of Contents