Flory 860 - Page 35

REF.
NO. PART NO.
DESCRIPTION QTY.
1 L60300 DEFLECTOR-branch 2
2 L60340 BRACKET-deflector 2
3 L20205 PLATE-inlet tube (almonds)(s/n ~1238) 1
4 L64320 PLATE-inlet tube (walnuts / pecans)(s/n ~1238) 1
5 L27100 HINGE-inlet tube door 1
6 L27080R DOOR-inlet tube 1
7 L34130R SEAL-door 2
8 L64305 CLAMPSTRIP-seal 2
9 L34120 SEAL-door 1
10 L64700 CLAMPSTRIP-seal 1
11 CH2024 CHAIN-door (2/0 x 24”) 2
12 L22175 SHIELD-conveyor drive (s/n ~1238) 1
L20815 SHIELD-conveyor drive (s/n 1247-1283) 1
L20845 SHIELD-conveyor drive (s/n 1292-1608) 1
L20855 SHIELD-conveyor drive (s/n 1624-2169) 1
13 4002 GAS SPRING-shield prop (s/n ~1238) 1
14 L60085 ARM-shield prop (s/n 1247~) 1
15 28A382 LATCH-rubber hook (s/n 1247~) 1
16 71D1376 HOOK-rubber (s/n 1247~) UAR
17 277A801 ANCHOR-rubber hook 1
18 L63470 DAMPER-inlet tube 1
19 L20835 COVER-conveyor 1
20 L20415 SHIELD-beater drive (upper) 1
21 L27010 HINGE-beater drive shields 1
22 L20405 SHIELD-beater drive (lower) 1
23 277A80 ANCHOR-rubber hook 1
24 68D842 HOOK-rubber UAR
25 28A382 LATCH-rubber hook UAR
26 L67775 MOUNT-quick coupler 1
27 6601-12-12 COUPLER-quick (3/4” female) 1
28 6602-12-12 COUPLER-quick (3/4” male) 1
29 L60200 SHIELD-elevator (lower)(all crops) 1
30 L20825 COVER-conveyor (lower)(almonds) 1
31 028561 LATCH-rubber hook UAR
32 L20856 SHIELD-conveyor drive (s/n 2185~) 1
33* MM1127 CAMERA (optional) 1
34* CB0033 CABLE-33' camera (not shown) 1
35* MM1027 MONITOR (not shown) 1
36* BA1025 PEDESTAL-monitor (not shown) 1
*NOTE: These parts are available in kit MK4024
H25PB008
FLORY INDUSTRIES, INC.
MODEL 850-860 HARVESTER
35
Back To The Table Of Contents