REF.
NO.
PART NO.
DESCRIPTION
QTY.
1 F5012 SHAFT-pickup belt (upper) (s/n ~1633) 1
F5012-R SHAFT-rubberized pickup belt (upper) (s/n 1634~) 1
NOTE: F5012 is replaced by F5012-R
2 PBC2108 BEARING-pickup belt shaft (upper) 2
3 F61348 PAD-bearing take up 2
4 F10728 REDI BOLT-bearing take up 2
5 L66010 ARM-torque (inc. 2 of L13015 bushings for s/n ~1246) 1
L66010 (s/n ~1709) Replaced by L30505
6 L67400 MOUNT-pickup belt motor 1
7A HM1149 MOTOR-p/u belt (Eaton) (s/n ~1246) (may use HM2149) 1
HM2149 MOTOR-p/u belt (Danfoss) (s/n 1247~1794) 1
HM3149 MOTOR-p/u belt (Danfoss) (s/n 1795~) 1
7B HM1149-K SEAL KIT-motor (HM1149) 1
HM2149-K SEAL KIT-motor (HM2149) 1
HM3149K SEAL KIT-motor (HM3149) 1
8 F4012 BELT-pickup (complete) 1
F4024 BELT-pickup (without teeth and flaps) 1
9 F3024 TEETH-pickup belt 11
10 F3036 FLAP-pickup belt 11
11 F6036 CLAMPSTRIP-pickup belt 11
12 F6024 CLAMPSTRIP-pickup belt 2
13 F61258 TROUGH-dirt (upper Rt)(s/n ~1633) Replaced by F61268 1
14A F61268 TROUGH-dirt (lower right) (s/n ~1633) 1
14B F61268 TROUGH-dirt (upper & lower right) (s/n 1634-1794) 1
F61468 TROUGH-dirt (upper & lower right) (s/n 1795~) 1
15 F60608 GUIDE-pickup belt (right) (s/n ~1794) 1
F60718 GUIDE-pickup belt (1/4" thick) (right) (s/n 1795~) 1
16 F61278 TROUGH-dirt (upper Lt)(s/n ~1633) Replaced by F61288 1
17A F61288 TROUGH-dirt (lower left) (s/n ~1633) 1
17B F61288 TROUGH-dirt (upper & lower left) (s/n 1634-1794) 1
F61488 TROUGH-dirt (upper & lower left) (s/n 1795~) 1
18 F60488 GUIDE-pickup belt (left) (s/n ~1794) 1
F60738 GUIDE-pickup belt (1/4" thick) (left) (s/n 1795~) 1
19 F50248 SHAFT-pickup belt (lower) (s/n ~1794) 1
F59258 SHAFT-pickup belt (lower) (s/n 1795~) 1
20 PBC2103 BEARING-pickup belt (lower) (s/n ~1794) 2
PBC2108 BEARING-pickup belt (lower) (s/n 1795~) 2
21 F1048 REDI BOLT-bearing take up 2
22 50JA12 SPROCKET-rotary trap (drive) (s/n ~1794) 1
50BTL16H SPROCKET-rotary trap (drive) (s/n 1795~) 1
H25PB003
FLORY INDUSTRIES, INC.
MODEL 850-860 HARVESTER
Back To The Table Of Contents
To Next Page
Loading...